h3c交换机接口划分vlan

h3c交换机接口划分vlan h3c端口加入vlan【图文教程】(2)

更新：2023-08-08 17:48:08 来源：IT袋作者：马勇

导读：h3c交换机接口划分vlan，save ，保存配置，再根据提示回答：Y 确认写入配置文件最终保存。 The current configuration will be written to the device. Are you sure? [Y/N]:yPlease input the file name(*.cfg)

h3c交换机接口划分vlan

save，保存配置，再根据提示回答：Y 确认写入配置文件最终保存。

The current configuration will be written to the device. Are you sure? [Y/N]:yPlease input the file name(*.cfg)[flash:/startup.cfg](To leave the existing filename unchanged, press the enter key):flash:/startup.cfg exists, overwrite? [Y/N]:y Validating file. Please wait.................... The current configuration is saved to the active main board successfully. Configuration is saved to device successfully.

注意事项：

1、H3C交换机将指定的接口或端口加入Vlan 需要确认此设备上是否存在对应的Vlan ID，否则会报错：This VLAN does not exist! vlan不存在

2、若没有对应的Vlan 需要对H3C交换机创建Vlan

上述的关于h3c交换机接口划分vlan h3c端口加入vlan【图文教程】的全部内容，网友们不妨在这方面予以借鉴