华为无线网络射频调优及WLAN跨VLAN的三层漫游示例

华为无线网络射频调优及WLAN跨VLAN的三层漫游示例(4)

更新：2024-04-03 00:46:35 来源：IT袋作者：马勇

导读：华为无线网络射频调优及WLAN跨VLAN的三层漫游示例，地址为 60de-4476-e360 ，并且根据 AP 的部署位置为 AP 配置名称，便于从名称上就能够了解 AP 的部署位置。例如 MAC 地址为 60de-4476-e360 的 AP 部署在 1号区域，

华为无线网络射频调优及WLAN跨VLAN的三层漫游示例

地址为60de-4476-e360，并且根据AP的部署位置为AP配置名称，便于从名称上就能够了解AP的部署位置。例如MAC地址为60de-4476-e360的AP部署在1号区域，命名此AP为area_1。

[AC-wlan-view] ap-id 0 ap-mac 60de-4476-e360
[AC-wlan-ap-0] ap-name area_1
Warning: This operation may cause AP reset. Continue? [Y/N]:y 
[AC-wlan-ap-0] ap-group ap-group1
Warning: This operation may cause AP reset. If the country code changes, it will clear channel, power and antenna gain configuration
s of the radio, Whether to continue? [Y/N]:y 
[AC-wlan-ap-0] quit

[AC-wlan-view] ap-id 1 ap-mac dcd2-fc04-b500
[AC-wlan-ap-1] ap-name area_2
Warning: This operation may cause AP reset. Continue? [Y/N]:y 
[AC-wlan-ap-1] ap-group ap-group2
Warning: This operation may cause AP reset. If the country code changes, it will clear channel, power and antenna gain configuration
s of the radio, Whether to continue? [Y/N]:y 
[AC-wlan-ap-1] quit

注：

AP上电后，当执行命令display ap all查看到AP的State字段为nor时，表示AP正常上线。

5.5、配置WLAN业务参数

创建名为wlan-net的安全模板，并配置安全策略。

[AC-wlan-view] security-profile name wlan-net
[AC-wlan-sec-prof-wlan-net] security wpa-wpa2 psk pass-phrase a1234567 aes
[AC-wlan-sec-prof-wlan-net] quit

创建名为wlan-net的SSID模板，并配置SSID名称为wlan-net。

[AC-wlan-view] ssid-profile name wlan-net
[AC-wlan-ssid-prof-wlan-net] ssid wlan-net
[AC-wlan-ssid-prof-wlan-net] quit

创建名为wlan-net1和wlan-net2的VAP模板，配置业务数据转发模式、业务VLAN，并且引用安全模板和SSID模板。

[AC-wlan-view] vap-profile name wlan-net1
[AC-wlan-vap-prof-wlan-net1] service-vlan vlan-id 101
[AC-wlan-vap-prof-wlan-net1] security-profile wlan-net
[AC-wlan-vap-prof-wlan-net1] ssid-profile wlan-net
[AC-wlan-vap-prof-wlan-net1] quit
[AC-wlan-view] vap-profile name wlan-net2
[AC-wlan-vap-prof-wlan-net2] service-vlan vlan-id 102
[AC-wlan-vap-prof-wlan-net2] security-profile wlan-net
[AC-wlan-vap-prof-wlan-net2] ssid-profile wlan-net
[AC-wlan-vap-prof-wlan-net2] quit

配置AP组引用VAP模板，area_1上射频0和射频1都使用VAP模板wlan-net1的配置，area_2上射频0和射频1都使用VAP模板wlan-net2的配置。

[AC-wlan-view] ap-group name ap-group1
[AC-wlan-ap-group-ap-group1] vap-profile wlan-net1 wlan 1 radio 0
[AC-wlan-ap-group-ap-group1] vap-profile wlan-net1 wlan 1 radio 1
[AC-wlan-ap-group-ap-group1] quit
[AC-wlan-view] ap-group name ap-group2
[AC-wlan-ap-group-ap-group2] vap-profile wlan-net2 wlan 1 radio 0
[AC-wlan-ap-group-ap-group2] vap-profile wlan-net2 wlan 1 radio 1
[AC-wlan-ap-group-ap-group2] quit